Warning! Refer to your equipment supplier’s handbook for the application to fill the cooling system. If coolant is to be added to the system during service, allow the engine to cool before the coolant is added. Remove the filler cap slowly as dangerous coolant could be discharged if the coolant is still hot and the system under pressure.
Caution: If coolant is added to the system during service, it must consist of the same original mixture as used to fill the system. See "Coolant specification" for details of the correct coolant to be used in the system.
Caution: When the cooling system is filled it is important to eliminate air from the intercooler to prevent an overheated engine.
| Back | Perkins engine series New 1000 Serie |
Headquarters : 700045 Iasi, 27 Sfantul Lazar Street, Kapital Invest Building - 2nd Floor
Warehouse :
700382 Iasi,88 Aurel Vlaicu Street
600343 Bacau, 32 Letea Street
062202 Bucuresti, 32 Preciziei Street
2059 Chisinau, 19/4 Petricani Street
Societate aflata in insolventa prin hotararea Tribunalului Iasi din 21 martie 2025, dosar nr. 1116/99/2025
Phone Romania:
+40 743 122 261
office@commatech.ro